COACT: Coronary artery centerline tracker.

BACKGROUND: The curved planar reformation (CPR) technique is one of the most commonly used methods in clinical practice to locate coronary arteries in medical images. PURPOSE: The artery centerline is the cornerstone for the generation of the CPR image. Here, we describe the development of a new fully automatic artery centerline tracker with the aim of increasing the efficiency and accuracy of the process. METHODS: We propose a COronary artery Centerline Tracker (COACT) framework which consists of an ostium point finder (OPFinder) model, an intersection point detector (IPDetector) model and a set of centerline tracking strategies. The output of OPFinder is the ostium points. The function of the IPDetector is to predict the intersections of a sample sphere and the centerlines. The centerline tracking process starts from two ostium points detected by the OPFinder, and combines the results of the IPDetector with a series of strategies to gradually reconstruct the coronary artery centerline tree. RESULTS: Two coronary CT angiography (CCTA) datasets were used to validate the models. Dataset1 contains 160 cases (32 for test and 128 for training) and dataset2 contains 70 cases (20 for test and 50 for training). The results show that the average distance between the ostium points predicted by the OPFinder and the manually annotated ostium points was 0.88 mm, which is similar to the differences between the results obtained by two observers (0.85 mm). For the IPDetector, the average overlap of the predicted and ground truth intersection points was 97.82% and this is also close to the inter-observer agreement of 98.50%. For the entire coronary centerline tree, the overlap between the results obtained by COACT and the gold standard was 94.33%, which is slightly lower than the inter-observer agreement, 98.39%. CONCLUSIONS: We have developed a fully automatic centerline tracking method for CCTA scans and achieved a satisfactory result. The proposed algorithms are also incorporated in the medical image analysis platform TIMESlice (https://slice-doc.netlify.app) for further studies.

Automatic coronary artery segmentation of CCTA images using UNet with a local contextual transformer.

Coronary artery segmentation is an essential procedure in the computer-aided diagnosis of coronary artery disease. It aims to identify and segment the regions of interest in the coronary circulation for further processing and diagnosis. Currently, automatic segmentation of coronary arteries is often unreliable because of their small size and poor distribution of contrast medium, as well as the problems that lead to over-segmentation or omission. To improve the performance of convolutional-neural-network (CNN) based coronary artery segmentation, we propose a novel automatic method, DR-LCT-UNet, with two innovative components: the Dense Residual (DR) module and the Local Contextual Transformer (LCT) module. The DR module aims to preserve unobtrusive features through dense residual connections, while the LCT module is an improved Transformer that focuses on local contextual information, so that coronary artery-related information can be better exploited. The LCT and DR modules are effectively integrated into the skip connections and encoder-decoder of the 3D segmentation network, respectively. Experiments on our CorArtTS2020 dataset show that the dice similarity coefficient (DSC), Recall, and Precision of the proposed method reached 85.8%, 86.3% and 85.8%, respectively, outperforming 3D-UNet (taken as the reference among the 6 other chosen comparison methods), by 2.1%, 1.9%, and 2.1%.

Reversal and Remission of T2DM - An Update for Practitioners.

Over the past 50 years, many countries around the world have faced an unchecked pandemic of obesity and type 2 diabetes (T2DM). As best practice treatment of T2DM has done very little to check its growth, the pandemic of diabesity now threatens to make health-care systems economically more difficult for governments and individuals to manage within their budgets. The conventional view has been that T2DM is irreversible and progressive. However, in 2016, the World Health Organization (WHO) global report on diabetes added for the first time a section on diabetes reversal and acknowledged that it could be achieved through a number of therapeutic approaches. Many studies indicate that diabetes reversal, and possibly even long-term remission, is achievable, belying the conventional view. However, T2DM reversal is not yet a standardized area of practice and some questions remain about long-term outcomes. Diabetes reversal through diet is not articulated or discussed as a first-line target (or even goal) of treatment by any internationally recognized guidelines, which are mostly silent on the topic beyond encouraging lifestyle interventions in general. This review paper examines all the sustainable, practical, and scalable approaches to T2DM reversal, highlighting the evidence base, and serves as an interim update for practitioners looking to fill the practical knowledge gap on this topic in conventional diabetes guidelines.

Estimation of central pulse wave velocity from radial pulse wave analysis.

BACKGROUND AND OBJECTIVE: Arterial stiffness, commonly assessed by carotid-femoral pulse wave velocity (cfPWV), is an independent biomarker for cardiovascular disease. The measurement of cfPWV, however, has been considered impractical for routine clinical application. Pulse wave analysis using a single pulse wave measurement in the radial artery is a convenient alternative. This study aims to identify pulse wave features for a more accurate estimation of cfPWV from a single radial pulse wave measurement. METHODS: From a dataset of 140 subjects, cfPWV was measured and the radial pulse waveform was recorded for 30 s twice in succession. Features were extracted from the waveforms in the time and frequency domains, as well as by wave separation analysis. All-possible regressions with bootstrapping, McHenry's select algorithm, and support vector regression were applied to compute models for cfPWV estimation. RESULTS: The correlation coefficients between the measured and estimated cfPWV were r = 0.81, r = 0.81, and r = 0.8 for all-possible regressions, McHenry's select algorithm, and support vector regression, respectively. The features selected by all-possible regressions are physiologically interpretable. In particular, the amplitude ratio of the diastolic peak to the notch of the radial pulse waveform (Rn,dr,P) is shown to be correlated with cfPWV. This correlation was further evaluated and found to be independent of wave reflections using a dataset (n = 3,325) of simulated pulse waves. CONCLUSIONS: The proposed method may serve as a convenient surrogate for the measurement of cfPWV. Rn,dr,P is associated with aortic pulse wave velocity and this association may not be dependent on wave reflection.

Automatic Coronary Artery Segmentation of CCTA Images With an Efficient Feature-Fusion-and-Rectification 3D-UNet.

Automatic coronary artery segmentation is of great value in diagnosing coronary disease. In this paper, we propose an automatic coronary artery segmentation method for coronary computerized tomography angiography (CCTA) images based on a deep convolutional neural network. The proposed method consists of three steps. First, to improve the efficiency and effectiveness of the segmentation, a 2D DenseNet classification network is utilized to screen out the non-coronary-artery slices. Second, we propose a coronary artery segmentation network based on the 3D-UNet, which is capable of extracting, fusing and rectifying features efficiently for accurate coronary artery segmentation. Specifically, in the encoding process of the 3D-UNet network, we adapt the dense block into the 3D-UNet so that it can extract rich and representative features for coronary artery segmentation; In the decoding process, 3D residual blocks with feature rectification capability are applied to improve the segmentation quality further. Third, we introduce a Gaussian weighting method to obtain the final segmentation results. This operation can highlight the more reliable segmentation results at the center of the 3D data blocks while weakening the less reliable segmentations at the block boundary when merging the segmentation results of spatially overlapping data blocks. Experiments demonstrate that our proposed method achieves a Dice Similarity Coefficient (DSC) value of 0.826 on a CCTA dataset constructed by us. The code of the proposed method is available at https://github.com/alongsong/3D_CAS.

Statistical Analysis of the Consistency of HRV Analysis Using BCG or Pulse Wave Signals.

Ballistocardiography (BCG) is considered a good alternative to HRV analysis with its non-contact and unobtrusive acquisition characteristics. However, consensus about its validity has not yet been established. In this study, 50 healthy subjects (26.2 ± 5.5 years old, 22 females, 28 males) were invited. Comprehensive statistical analysis, including Coefficients of Variation (CV), Lin's Concordance Correlation Coefficient (LCCC), and Bland-Altman analysis (BA ratio), were utilized to analyze the consistency of BCG and ECG signals in HRV analysis. If the methods gave different answers, the worst case was taken as the result. Measures of consistency such as Mean, SDNN, LF gave good agreement (the absolute value of CV difference < 2%, LCCC > 0.99, BA ratio < 0.1) between J-J (BCG) and R-R intervals (ECG). pNN50 showed moderate agreement (the absolute value of CV difference < 5%, LCCC > 0.95, BA ratio < 0.2), while RMSSD, HF, LF/HF indicated poor agreement (the absolute value of CV difference ≥ 5% or LCCC ≤ 0.95 or BA ratio ≥ 0.2). Additionally, the R-R intervals were compared with P-P intervals extracted from the pulse wave (PW). Except for pNN50, which exhibited poor agreement in this comparison, the performances of the HRV indices estimated from the PW and the BCG signals were similar.

Noninvasive estimation of aortic pressure waveform based on simplified Kalman filter and dual peripheral artery pressure waveforms.

BACKGROUND AND OBJECTIVE: Aortic pressure (Pa) is important for the diagnosis of cardiovascular disease. However, its direct measurement is invasive, not risk-free, and relatively costly. In this paper, a new simplified Kalman filter (SKF) algorithm is employed for the reconstruction of the Pa waveform using dual peripheral artery pressure waveforms. METHODS: Pa waveforms obtained in a previous study were collected from 25 patients. Simultaneously, radial and femoral pressure waveforms were generated from two simulation experiments, using transfer functions. In the first, the transfer function is a known finite impulse response; and in the second, it is derived from a tube-load model. To analyze the performance of the proposed SKF algorithm, variable amounts of noise were added to the observed output signal, to give a range of signal-to-noise ratios (SNRs). Additionally, central aortic, brachial and femoral pressure waveforms were simultaneously collected from 2 Sprague-Dawley rats and the measured and reconstructed Pa waveforms were compared. RESULTS: The proposed SKF algorithm outperforms canonical correlation analysis (CCA), which is the current state-of-the-art blind system identification method for the non-invasive estimation of central aortic blood pressure. It is also shown that the proposed SKF algorithm is more noise-tolerant than the CCA algorithm over a wide range of SNRs. CONCLUSION: The simulations and animal experiments illustrate that the proposed SKF algorithm is accurate and stable in the face of low SNRs. Improved methods for estimating central blood pressure as a measure of cardiac load adds to their value as a prognostic and diagnostic tool.

Improving the accuracy and robustness of carotid-femoral pulse wave velocity measurement using a simplified tube-load model.

Arterial stiffness, as measured by pulse wave velocity, for the early non-invasive screening of cardiovascular disease is becoming ever more widely used and is an independent prognostic indicator for a variety of pathologies including arteriosclerosis. Carotid-femoral pulse wave velocity (cfPWV) is regarded as the gold standard for aortic stiffness. Existing algorithms for cfPWV estimation have been shown to have good repeatability and accuracy, however, further assessment is needed, especially when signal quality is compromised. We propose a method for calculating cfPWV based on a simplified tube-load model, which allows for the propagation and reflection of the pulse wave. In-vivo cfPWV measurements from 57 subjects and numerical cfPWV data based on a one-dimensional model were used to assess the method and its performance was compared to three other existing approaches (waveform matching, intersecting tangent, and cross-correlation). The cfPWV calculated using the simplified tube-load model had better repeatability than the other methods (Intra-group Correlation Coefficient, ICC = 0.985). The model was also more accurate than other methods (deviation, 0.13 ms-1) and was more robust when dealing with noisy signals. We conclude that the determination of cfPWV based on the proposed model can accurately and robustly evaluate arterial stiffness.

Relationship between epicardial fat volume on cardiac CT and atherosclerosis severity in three-vessel coronary artery disease: a single-center cross-sectional study.

BACKGROUND: The ideal treatment strategy for stable three-vessel coronary artery disease (CAD) patients are difficult to determine and for patients undergoing conservative treatment, imaging evidence of coronary atherosclerotic severity progression remains limited. Epicardial fat volume (EFV) on coronary CT angiography (CCTA) has been considered to be associated with coronary atherosclerosis. Therefore, this study aims to evaluate the relationship between EFV level and coronary atherosclerosis severity in three-vessel CAD. METHODS: This retrospective study enrolled 252 consecutive patients with three-vessel CAD and 252 normal control group participants who underwent CCTA between January 2018 and December 2019. A semi-automatic method was developed for EFV quantification on CCTA images, standardized by body surface area. Coronary atherosclerosis severity was evaluated and scored by the number of coronary arteries with ≥ 50% stenosis on coronary angiography. Patients were subdivided into groups on the basis of lesion severity: mild (score = 3 vessels, n = 85), moderate (3.5 vessels ≤ score < 4 vessels, n = 82), and severe (4 vessels ≤ score ≤ 7 vessels, n = 85). The independent sample t-test, analysis of variance, and logistic regression analysis were used to evaluate the associations between EFV level and severity of coronary atherosclerosis. RESULTS: Compared with normal controls, three-vessel CAD patients had significantly higher EFV level (65 ± 22 mL/m2 vs. 48 ± 19 mL/m2; P < 0.001). In patients with three-vessel CAD, there was a progressive decline in EFV level as the score of coronary atherosclerosis severity increased, especially in those patients with a body mass index (BMI) ≥ 25 kg/m2 (75 ± 21 mL/m2 vs. 72 ± 22 mL/m2 vs. 62 ± 17 mL/m2; P < 0.05). Multivariable regression analysis showed that both BMI (OR 3.40, 95% CI 2.00-5.78, P < 0.001) and the score of coronary atherosclerosis severity (OR 0.49, 95% CI 0.26-0.93, P < 0.05) were independently related to the change of EFV level. CONCLUSION: Three-vessel CAD patients do have higher EFV level than the normal controls. While, there may be an inverse relationship between EFV level and the severity of coronary atherosclerosis in patients with three-vessel CAD.

Detection and Localization of Myocardial Infarction Based on Multi-Scale ResNet and Attention Mechanism.

PURPOSE: Myocardial infarction (MI) is one of the most common cardiovascular diseases, frequently resulting in death. Early and accurate diagnosis is therefore important, and the electrocardiogram (ECG) is a simple and effective method for achieving this. However, it requires assessment by a specialist; so many recent works have focused on the automatic assessment of ECG signals. METHODS: For the detection and localization of MI, deep learning models have been proposed, but the diagnostic accuracy of this approaches still need to be improved. Moreover, with deep learning methods the way in which a given result was achieved lacks interpretability. In this study, ECG data was obtained from the PhysioBank open access database, and was analyzed as follows. Firstly, the 12-lead ECG signal was preprocessed to identify each beat and obtain each heart interval. Secondly, a multi-scale deep learning model combined with a residual network and attention mechanism was proposed, where the input was the 12-lead ECG recording. Through the SENet model and the Grad-CAM algorithm, the weighting of each lead was calculated and visualized. Using existing knowledge of the way in which different types of MI gave characteristic patterns in specific ECG leads, the model was used to provisionally diagnose the type of MI according to the characteristics of each of the 12 ECG leads. RESULTS: Ten types of MI anterior, anterior lateral, anterior septal, inferior, inferior lateral, inferior posterior, inferior posterior lateral, lateral, posterior, and posterior lateral were diagnosed. The average accuracy, sensitivity, and specificity for MI detection of all lesion types was 99.98, 99.94, and 99.98%, respectively; and the average accuracy, sensitivity, and specificity for MI localization was 99.79, 99.88, and 99.98%, respectively. CONCLUSION: When compared to existing models based on traditional machine learning methods, convolutional neural networks and recurrent neural networks, the results showed that the proposed model had better diagnostic performance, being superior in accuracy, sensitivity, and specificity.

Estimation of coronary artery movement using a non-rigid registration with global-local structure preservation.

BACKGROUND: At present, coronary artery disease (CAD) is the leading cause of death worldwide. Many studies have shown that CAD is strongly associated with the motion characteristics of the coronary arteries. Although cardiovascular imaging technology has been widely used for the diagnosis of CAD, the motion parameters of the heart and coronary arteries cannot be directly calculated from the images. In this paper, we propose a point set registration method with global and local topology constraints to quantify coronary artery movement. METHODS: The global constraint is the motion coherence of the point set which enforces the smoothness of the displacement field. The local linear embedding based topological structure and the local feature descriptor i.e., the 3D shape context, are designed to retain the local structure of the point set. We incorporate these constraints into a maximum likelihood framework and derive an expectation-maximization algorithm to obtain the transformation function between the two point sets. The proposed method was compared with four existing algorithms using simulated data and applied to the real data obtained from 4D CT angiograms. RESULTS: For the simulation data, the proposed method achieves a lower registration error than the comparison algorithms. For the real data, the proposed method shows that, in most cases, the right coronary artery achieves a larger velocity than the left anterior descending and left circumflex branches, and there are three well-defined velocity peaks, during the cardiac cycle for these branches. CONCLUSION: The proposed approach is feasible and effective in quantifying coronary artery movement and thus adds to the diagnostic power of coronary imaging.

Automatic quantification of epicardial adipose tissue volume.

PURPOSE: Epicardial fat is the adipose tissue between the serosal pericardial wall layer and the visceral layer. It is distributed mainly around the atrioventricular groove, atrial septum, ventricular septum and coronary arteries. Studies have shown that the density, thickness, volume and other characteristics of epicardial adipose tissue (EAT) are independently correlated with a variety of cardiovascular diseases. Given this association, the accurate determination of EAT volume is an essential aim of future research. Therefore, the purpose of this study was to establish a framework for fully automatic EAT segmentation and quantification in coronary computed tomography angiography (CCTA) scans. METHODS: A set of 103 scans are randomly selected from our medical center. An automatic pipeline has been developed to segment and quantify the volume of EAT. First, a multi-slice deep neural network is used to simultaneously segment the pericardium in multiple adjacent slices. Then a deformable model is employed to reduce false positive and negative regions in the segmented binary pericardial images. Finally, the pericardium mask is used to define the region of interest (ROI) and the threshold method is utilized to extract the pixels ranging from -175 Hounsfield units (HU) to -15 HU for the segmentation of EAT. RESULTS: The Dice indices of the pericardial segmentation using the proposed method with respect to the manual delineation results of two radiology experts were 97.1%  ±  0.7% and 96.9%  ±  0.6%, respectively. The inter-observer variability was also assessed, resulting in a Dice index of 97.0%  ±  0.7%. For the EAT segmentation results, the Dice indices between the proposed method and the two radiology experts were 93.4%  ±  1.5% and 93.3%  ±  1.3%, respectively, and the same measurement between the experts themselves was 93.6%  ±  1.9%. The Pearson's correlation coefficients between the EAT volumes computed from the results of the proposed method and the manual delineation by the two experts were 1.00 and 0.99 and the same coefficients between the experts was 0.99. CONCLUSIONS: This work describes the development of a fully automatic EAT segmentation and quantification method from CCTA scans and the results compare favorably with the assessments of two independent experts. The proposed method is also packaged with a graphical user interface which can be found at https://github.com/MountainAndMorning/EATSeg.

Aortic pressure waveform reconstruction using a multi-channel Newton blind system identification algorithm.

BACKGROUND: Central aortic pressure (CAP) as the major load on the left heart is of great importance in the diagnosis of cardiovascular disease. Studies have pointed out that CAP has a higher predictive value for cardiovascular disease than peripheral artery pressure (PAP) measured by means of traditional sphygmomanometry. However, direct measurement of the CAP waveform is invasive and expensive, so there remains a need for a reliable and well validated non-invasive approach. METHODS: In this study, a multi-channel Newton (MCN) blind system identification algorithm was employed to noninvasively reconstruct the CAP waveform from two PAP waveforms. In simulation experiments, CAP waveforms were recorded in a previous study, on 25 patients and the PAP waveforms (radial and femoral artery pressure) were generated by FIR models. To analyse the noise-tolerance of the MCN method, variable amounts of noise were added to the peripheral signals, to give a range of signal-to-noise ratios. In animal experiments, central aortic, brachial and femoral pressure waveforms were simultaneously recorded from 2 Sprague-Dawley rats. The performance of the proposed MCN algorithm was compared with the previously reported cross-relation and canonical correlation analysis methods. RESULTS: The results showed that the root mean square error of the measured and reconstructed CAP waveforms and less noise-sensitive using the MCN algorithm was smaller than those of the cross-relation and canonical correlation analysis approaches. CONCLUSION: The MCN method can be exploited to reconstruct the CAP waveform. Reliable estimation of the CAP waveform from non-invasive measurements may aid in early diagnosis of cardiovascular disease.

Silicon photonics-based laser Doppler vibrometer array for carotid-femoral pulse wave velocity (PWV) measurement.

Pulse wave velocity (PWV) is a reference measure for aortic stiffness, itself an important biomarker of cardiovascular risk. To enable low-cost and easy-to-use PWV measurement devices that can be used in routine clinical practice, we have designed several handheld PWV sensors using miniaturized laser Doppler vibrometer (LDV) arrays in a silicon photonics platform. The LDV-based PWV sensor design and the signal processing protocol to obtain pulse transit time (PTT) and carotid-femoral PWV in a feasibility study in humans, are described in this paper. Compared with a commercial reference PWV measurement system, measuring arterial pressure waveforms by applanation tonometry, LDV-based displacement signals resulted in more complex signals. However, we have shown that it is possible to identify reliable fiducial points for PTT calculation using the maximum of the 2nd derivative algorithm in LDV-based signals, comparable to those obtained by the reference technique, applanation tonometry.

Quality evaluation of signals collected by portable ECG devices using dimensionality reduction and flexible model integration.

OBJECTIVE: Portable devices for collecting electrocardiograms (ECGs) and telemedicine systems for diagnosis are available to residents in deprived areas, but ECGs collected by non-professionals are not necessarily reliable and may impair the accuracy of diagnosis. We propose an algorithm for accurate ECG quality assessment, which can help improve the reliability of ECGs collected by portable devices. APPROACH: Using challenge data from CinC (2019), signals were classified as 'acceptable' and 'unacceptable' by annotators. The training set contained 998 12-lead ECGs and the test set contained 500. A 998 × 84 feature matrix, S, was formed by feature extraction and three basic models were obtained through training SVM, DT and NBC on S. The feature subsets S1, S2 and S3 were obtained by dimensionality reduction on S using SVM, DT and NBC, respectively. Three other basic models were obtained through training SVM on S1, DT on S2 and NBC on S3. By combining these six basic models, several integrated models were formed. An iterative method was proposed to select the integrated model with the highest accuracy on the training set. Having compared differences between the output labels and the original data labels, evaluation criteria were calculated. MAIN RESULTS: An accuracy of 98.70% and 98.60% was achieved on the training and test datasets, respectively. High F1 score and Kappa values were also obtained. SIGNIFICANCE: The proposed algorithm has advantages over previously reported approaches during automatic assessment of ECG quality and can thus help to reduce reliance on highly trained professionals when assessing the quality of ECGs.

A high-performance 8 nV/√Hz 8-channel wearable and wireless system for real-time monitoring of bioelectrical signals.

BACKGROUND: It is widely accepted by the scientific community that bioelectrical signals, which can be used for the identification of neurophysiological biomarkers indicative of a diseased or pathological state, could direct patient treatment towards more effective therapeutic strategies. However, the design and realisation of an instrument that can precisely record weak bioelectrical signals in the presence of strong interference stemming from a noisy clinical environment is one of the most difficult challenges associated with the strategy of monitoring bioelectrical signals for diagnostic purposes. Moreover, since patients often have to cope with the problem of limited mobility being connected to bulky and mains-powered instruments, there is a growing demand for small-sized, high-performance and ambulatory biopotential acquisition systems in the Intensive Care Unit (ICU) and in High-dependency wards. Finally, to the best of our knowledge, there are no commercial, small, battery-powered, wearable and wireless recording-only instruments that claim the capability of recording electrocorticographic (ECoG) signals. METHODS: To address this problem, we designed and developed a low-noise (8 nV/√Hz), eight-channel, battery-powered, wearable and wireless instrument (55 × 80 mm2). The performance of the realised instrument was assessed by conducting both ex vivo and in vivo experiments. RESULTS: To provide ex vivo proof-of-function, a wide variety of high-quality bioelectrical signal recordings are reported, including electroencephalographic (EEG), electromyographic (EMG), electrocardiographic (ECG), acceleration signals, and muscle fasciculations. Low-noise in vivo recordings of weak local field potentials (LFPs), which were wirelessly acquired in real time using segmented deep brain stimulation (DBS) electrodes implanted in the thalamus of a non-human primate, are also presented. CONCLUSIONS: The combination of desirable features and capabilities of this instrument, namely its small size (~one business card), its enhanced recording capabilities, its increased processing capabilities, its manufacturability (since it was designed using discrete off-the-shelf components), the wide bandwidth it offers (0.5-500 Hz) and the plurality of bioelectrical signals it can precisely record, render it a versatile and reliable tool to be utilized in a wide range of applications and environments.

Robust heart-rate estimation from facial videos using Project_ICA.

OBJECTIVE: Remote photoplethysmography (rPPG) can achieve non-contact measurement of heart rate (HR) from a continuous video sequence by scanning the skin surface. However, practical applications are still limited by factors such as non-rigid facial motion and head movement. In this work, a detailed system framework for remotely estimating heart rate from facial videos under various movement conditions is described. APPROACH: After the rPPG signal has been obtained from a defined region of the facial skin, a method, termed 'Project_ICA', based on a skin reflection model, is employed to extract the pulse signal from the original signal. MAIN RESULTS: To evaluate the performance of the proposed algorithm, a dataset containing 112 videos including the challenges of various skin tones, body motion and HR recovery after exercise was created from 28 participants. SIGNIFICANCE: The results show that Project_ICA, when evaluated by several criteria, provides a more accurate and robust estimate of HR than most existing methods, although problems remain in obtaining reliable measurements from dark-skinned subjects.

Quantitative Comparison of the Performance of Piezoresistive, Piezoelectric, Acceleration, and Optical Pulse Wave Sensors.

The accurate measurement of the arterial pulse wave is beneficial to clinical health assessment and is important for the effective diagnosis of many types of cardiovascular disease. A variety of sensors have been developed for the non-invasive detection of these waves, but the type of sensor has an impact on the measurement results. Therefore, it is necessary to compare and analyze the signals obtained under a range of conditions using various pulse sensors to aid in making an informed choice of the appropriate type. From the available types we have selected four: a piezoresistive strain gauge sensor (PESG) and a piezoelectric Millar tonometer (the former with the ability to measure contact force), a circular film acceleration sensor, and an optical reflection sensor. Pulse wave signals were recorded from the left radial, carotid, femoral, and digital arteries of 60 subjects using these four sensors. Their performance was evaluated by analyzing their susceptibilities to external factors (contact force, measuring site, and ambient light intensity) and by comparing their stability and reproducibility. Under medium contact force, the peak-to-peak amplitude of the signals was higher than that at high and low force levels and the variability of signal waveform was small. The optical sensor was susceptible to ambient light. Analysis of the intra-class correlation coefficients (ICCs) of the pulse wave parameters showed that the tonometer and accelerometer had good stability (ICC > 0.80), and the PESG and optical sensor had moderate stability (0.46 < ICC < 0.86). Intra-observer analysis showed that the tonometer and accelerometer had good reproducibility (ICC > 0.75) and the PESG and optical sensor had moderate reproducibility (0.42 < ICC < 0.91). Inter-observer analysis demonstrated that the accelerometer had good reproducibility (ICC > 0.85) and the three other sensors had moderate reproducibility (0.52 < ICC < 0.96). We conclude that the type of sensor and measurement site affect pulse wave characteristics and the careful selection of appropriate sensor and measurement site are required according to the research and clinical need. Moreover, the influence of external factors such as contact pressure and ambient light should be fully taken into account.

Evaluation of Cardiorespiratory Function During Cardiopulmonary Exercise Testing in Untreated Hypertensive and Healthy Subjects.

Objective: This study aimed to compare differences in cardiorespiratory function between untreated hypertensive subjects (UHS) and healthy subjects (HS) during cardiopulmonary exercise testing (CPET). Additionally, it also aimed to explore the potential mechanisms of different exercise responses in cardiorespiratory function before, during and after CPET. Methods: Thirty subjects (15 UHS and 15 HS) were enrolled. Photoplethysmography (PPG), respiratory signal, and ECG were simultaneously collected while subjects were performing CPET. Fiducial points (a, b, c, d, e) were extracted from the second derivative of the PPG (SDPPG), and the ratios b/a, c/a, d/a, e/a, and (b-c-d-e)/a (named Aging Index, AGI) were calculated as markers of systolic and diastolic function. Additionally, respiratory rate was calculated and analyzed. Results:Before CPET, there were no significant differences in b/a, d/a, and AGI between two groups. However, after CPET, b/a (-0.9 ± 0.19 vs. -1.06 ± 0.19, p-value = 0.03) and AGI (-0.49 ± 0.75 vs. -1.15 ± 0.59, p-value = 0.011) of the UHS group were significantly higher than those of the HS. The d/a (-0.32 ± 0.24 vs. -0.14 ± 0.17, p-value = 0.024), and c/a (-0.33 ± 0.26 vs. -0.07 ± 0.19, p-value = 0.004) were significantly lower in UHS than those in HS. In contrast, before CPET, e/a (0.22 ± 0.11 vs. 0.32 ± 0.09, p-value = 0.007) in UHS was significantly lower than that in HS, while after CPET there was no significant difference between the two groups in this variable. In addition, during CPET, AGI (p-value = 0.003), and respiratory rate (p-value = 0.000) in UHS were significantly higher in comparison with before CPET. Conclusions: Different exercise responses showed the differences of cardiorespiratory function between UHS and HS. These differences not only can highlight the CV risk of UHS, but also can predict the appearance of arterial stiffness in UHS. Additionally, during CPET, significant differences in AGI, autonomic nervous function and respiratory activity assessed by respiratory rate were found between the two groups in comparison with before CPET.

Effects of exercise modalities on central hemodynamics, arterial stiffness and cardiac function in cardiovascular disease: Systematic review and meta-analysis of randomized controlled trials.

BACKGROUND: Exercise is accepted as an important contribution to the rehabilitation of patients with cardiovascular disease (CVD). This study aims to better understand the possible causes for lack of consensus and reviews the effects of three exercise modalities (aerobic, resistance and combined exercise) on central hemodynamics, arterial stiffness and cardiac function for better rehabilitation strategies in CVD. METHODS: The electronic data sources, Cochrane Library, MEDLINE, Web of Science, EBSCO (CINAHL), and ScienceDirect from inception to July 2017 were searched for randomized controlled trials (RCTs) investigating the effect of exercise modalities in adult patients with CVD. The effect size was estimated as mean differences (MD) with 95% confidence intervals (CI). Subgroup analysis and meta-regression were used to study potential moderating factors. RESULTS: Thirty-eight articles describing RCTs with a total of 2089 patients with CVD were included. The pooling revealed that aerobic exercise [MD(95%CI) = -5.87 (-8.85, -2.88), P = 0.0001] and resistance exercise [MD(95%CI) = -7.62 (-10.69, -4.54), P<0.00001] significantly decreased aortic systolic pressure (ASP). Resistance exercise significantly decreased aortic diastolic pressure [MD(95%CI) = -4(-5.63, -2.37), P<0.00001]. Aerobic exercise significantly decreased augmentation index (AIx) based on 24-week exercise duration and patients aged 50-60 years. Meanwhile, aerobic exercise significantly improved carotid-femoral pulse wave velocity (cf-PWV) [MD(95%CI) = -0.42 (-0.83, -0.01), P = 0.04], cardiac output (CO) [MD(95% CI) = 0.36(0.08, 0.64), P = 0.01] and left ventricular ejection fraction (LVEF) [MD(95%CI) = 3.02 (2.11, 3.93), P<0.00001]. Combined exercise significantly improved cf-PWV [MD(95%CI) = -1.15 (-1.95, -0.36), P = 0.004] and CO [MD(95% CI) = 0.9 (0.39, 1.41), P = 0.0006]. CONCLUSIONS: Aerobic and resistance exercise significantly decreased ASP, and long-term aerobic exercise reduced AIx. Meanwhile, aerobic and combined exercise significantly improved central arterial stiffness and cardiac function in patients with CVD. These findings suggest that a well-planned regime could optimize the beneficial effects of exercise and can provide some evidence-based guidance for those involved in cardiovascular rehabilitation of patients with CVD.